Laser Cutter - Hardware
Hardware solutions for Laser Cutters - These solutions are visible for all users visiting our website
In order to have your laser perform at an optimal level you need to perform following maintenance guidelines: Daily Clean external optics Monthl...
Tue, 16 Oct, 2018 at 10:04 AM
Generally around 15.000 to 20.000 hours.
Tue, 13 Nov, 2018 at 9:34 AM
Yes it is possible. However it’s not only the case of plugging in a new tube, upgrade might involve replacing the PSU (Power Supply Unit) to accommodate the...
Tue, 13 Nov, 2018 at 9:52 AM
This depends on the substrate you are cutting. However, it is good practice to clean the lens, head mirror and traveling mirror on a daily basis. The primar...
Tue, 13 Nov, 2018 at 12:04 PM
With a good cleaning regime they should last for a long period. However, as the coating can be rubbed off due to the cleaning process, it is advised to repl...
Tue, 13 Nov, 2018 at 12:08 PM
1. Clean external optics daily 2. Clean interior optics monthly 3. Clean and lubricate with thin silicone oil monthly the X and Y rails 4. For air cooled...
Tue, 13 Nov, 2018 at 12:26 PM
As long as the mirrors have not been disturbed, or fitted incorrectly after cleaning, the beam path should not move once the machine has been installed. Imp...
Tue, 13 Nov, 2018 at 12:27 PM
They should last for many years unless damaged by something other than cutting (dropping heavy items on the slate).
Tue, 13 Nov, 2018 at 12:27 PM
1. Vacuum cleaner to remove small loose objects. 2. For more stubborn contamination, remove the planks and soak them in a bath of water/liquid soap then us...
Tue, 13 Nov, 2018 at 12:27 PM
Class 1 system. Fully interlocked lid - Electrical and mechanical protection. Interlocked hinged cover on the front of the conveyor.
Tue, 13 Nov, 2018 at 12:31 PM