Flatbed - Tools

How to replace a POT knife
There are two different pneumatic systems.  this configuration is for the F1612   This configuration is for all the other models. 1. Press...
Fri, 13 Sep, 2019 at 1:31 PM
How to replace an EOT knife
1. Press 'Change Tool' in Axis Control.  2. Loosen the screw.  3. Move the top part to the right.  4. Push the button. Us...
Fri, 13 Sep, 2019 at 1:30 PM
How to replace a double edge knife
1. Press 'Change Tool' in Axis Control.  2. Push the button. Keep turning the wheel counterclockwise. Remove the tool.  3. Hold ...
Fri, 13 Sep, 2019 at 1:29 PM
How to replace a single edge knife
1. Press 'Change Tool' in Axis Control. 2. Push the button and keep turning the wheel. Remove the tool.  3. Hold the gliding dis...
Fri, 13 Sep, 2019 at 1:29 PM
How to replace a heavy duty knife
1. Press 'Change Tool' in Axis Control. 2. Push the button and turn the wheel counterclockwise. Remove the tool. 3. Remove the t...
Fri, 13 Sep, 2019 at 1:28 PM
How to replace a Kiss-Cut knife
1. Press 'Change Tool' in Axis Control.  2. Push the button and keep turning the wheel. Remove when it is loosened.   3. Keep tur...
Fri, 13 Sep, 2019 at 1:27 PM
How to replace a V-Cut knife
1. Press 'Change Tool' in Axis Control.  2. To get the tool out, screw in the fitting aid (1), whilst holding it. Keep turning the wheel ...
Fri, 13 Sep, 2019 at 1:27 PM
How to mount a Tangential module on an F Series
1. Press 'Change Tool' in Axis Control.  2.. Make sure the screw is loosened.   3. By inserting the module on the machine. Pay Att...
Fri, 13 Sep, 2019 at 1:26 PM
How to replace a drag knife
1. Don't forget to always click on 'Change Tool' in Axis Control.  2. Loosen the screw and take the tool out.  3. Turn t...
Fri, 13 Sep, 2019 at 1:25 PM
How to mount a Drag Module on an F Series
1. Press 'Change Tool' in Axis Control. 2. Make sure the screw is loosend.   3. Always install the drag module in sl...
Fri, 13 Sep, 2019 at 1:25 PM