How to create "tool property presets" for one material

Modified on Mon, 26 Aug at 1:37 PM

Introduction 


In this example, we will create different speed settings for different routing bits for the material Aluminium Composite board.


1. Select the material where you want to create the speed settings for each bit diameter:




2. In the next step select the material “Thickness” where you want to create the speed settings for each bit diameter. Then select the method and press on the setup icon.




3. Duplicate the “Default” layer.




4. A new Tool property setting will be created for this router for this material for this thickness.





5. Change the name, description to your own needs and press OK




6. Do the same for the 3 mm diameter bit:

  • Duplicate the tool properties of the default tool
  • Change the name and description
  • Change the speed setting to 40mm/s in this case (as requested by the customer)
  • Select the bit that you want to use, in this case the 3mm (P/N 500-9850)
  • Select “OK”




7. Press OK in the Material setup




8. When you now open a job with the Aluminium Composite Board material you will find in your Thru-cut settings the different tool properties.










Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article