F Series - How to Replace a Kiss-Cut Knife

Modified on Wed, 22 May at 2:51 PM

1. Click Change Tool in Axis Control. 

2. Press and hold the button on the module (1) while turning the wheel (2) until the tool can be removed.


3. After removing the tool, turn the end of the tool counterclockwise to access the knife.

4. Remove the knife with the backside of a knife. 

5. Replace the knife. Put the flat side of the knife against the flat side of the knife holder. Use the knife-pusher to make sure the knife is secured.

6. Replace the knife holder in the tool and keep turning clockwise until you see the tip of the knife. Push and turn until the pin fits. 

7. Turn until you see the tip of the knife. 

8. Insert the tool back in the module, press and hold the button (1)  and turn the tool until the pin falls in the slot (2). 

9. Turn the wheel until it's tight. 

10. Click Online in Axis Control. 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article