S Class 2 - Touch Screen Calibration

This procedure describes how to calibrate the touch screen of a Summa S Class 2 series cutter

All cutter activity can be initiated from the 320x240 dot color touch panel. The panel displays information about the cutter’s current status and/or actions that need to be taken. In case the touch screen behaves strange, it may be necessary to recalibrate the screen.

The touch screen also needs to be calibrated whenever the touch screen has been replaced, or when the main board has been replaced.

It is not necessary to load media in the machine to calibrate the touch screen. 

1. Power on the cutter

2. Press settings.

3. Press more .

4. press more again.

5. Press calibrate touch screen.

6. Follow the onscreen instructions:
With a pen, tip once on the four crosses.

7. Press apply.